VSM220-02 is an installation contactor with manual control (AUTO / 1 / 0) and ON-OFF indicator, for switching single-phase circuits, especially resistive loads.
Key features
- Contacts: 2 NC (2-pole), rated thermal current 20 A
- AC-1 load up to 4 kW (230 V, 1-phase); the AC-3 (motor) rating of 1.3 kW applies to NO contacts only, so not to this all-NC version
- Coil control voltage: AC 24 V
- Manual control: AUTO (normal contactor operation), 1 (contacts held switched until the next coil impulse), 0 (contacts held in rest state regardless of coil voltage)
- Protection IP20; IP40 with optional cover; auxiliary contacts VSK-11 / VSK-20 can be added
- DIN rail mounting, dimensions 17.5 × 85 × 60 mm
